What should we pay attention to in the design and printing of color printing? Color printing needs a certain amount of knowledge to do well. If there is no corresponding knowledge and skills, it is easy to have various problems in printing and affect the printing effect. So what should be paid attention to in the design and printing of color printing? Now let's give a detailed introduction to Jinan Color Design and Printing Factory.
The following points should be noted in the design and printing of color printing:
1. For characters with too small font size, avoid selecting fonts with too thin strokes, such as imitation Song typeface, thin circle, etc. The strokes of the font are originally thin. If the font size is too small, the strokes will be easily lost during printing, resulting in incomplete handwriting;
2、尤其是細小的文字，應避免使用多色套?。?/div>
2. In particular, the use of multicolor overprinting should be avoided for small text;
3、盡量避免使用細小的反白文字；
3. Try to avoid using small anti-white words;
4、細小的文字應避免疊印在深色的背景上；
4. Small text should avoid being overprinted on a dark background;
5、細小的文字應避免使用金墨、銀墨印刷，金墨、銀墨的顆粒比一般油墨粗，用于印刷細小的文字時，容易導致字跡模糊等問題；
5. Gold and silver ink should be avoided for printing small words. The particles of gold and silver ink are thicker than ordinary ink. When used for printing small words, it is easy to cause problems such as blurred handwriting;
6、盡可能采用疊印方式在底色上印文字和圖片，而不用在底色版上挖空的方式。
6. Try to use overprint to print text and pictures on the background instead of hollowing out on the background.
而且紙張外表越粗糙，油墨的吸收量就越大。打印紙的粗糙外表，油墨泛濫現象更容易出現。這是因為有些紙張纖維的交織發生的間隙，均勻的涂層還沒有很好的覆蓋。這種壓紋紙和印版時，油墨層外表發生不良接觸。如果通過適當?shù)挠∷毫Γ梢杂凶銐虻慕佑|時間與油墨層的布局的紙張的平滑性差，實現均勻的壓印接觸，可以確保印刷墨層均勻平服。
And the rougher the paper surface, the greater the ink absorption. The rough appearance of printing paper and ink flooding are more likely to occur. This is because some paper fibers have not been well covered by the uniform coating due to the interlacing gap. When the embossed paper and the printing plate, the surface of the ink layer has a bad contact. If proper printing pressure is applied, enough contact time can be available and the smoothness of the paper with the layout of the ink layer is poor, so as to achieve uniform imprint contact, which can ensure that the printing ink layer is uniform and flat.
These are the matters needing attention in the design and printing of color printing. Only taking these conditions into consideration can ensure the printing effect and satisfy customers. If you want to continue to learn about the printing manufacturer or more relevant information, please visit our website http://www.aozhouhui.com ！
濟南華政印務有限公司
