Hardcover books have many processing procedures and complex operations, which are more difficult to process than glue bookings and horse riding bookings, and there are many quality problems. Therefore, in order to ensure the quality of hardcover books, operators should master the operation specifications of post printing processes.

生產前

Before production

1.檢查待加工產品明細

1. Check the details of products to be processed

按照車間生產施工單，檢查待加工產品明細與施工單是否一致，發現問題及時向生產部反映。

Check whether the details of products to be processed are consistent with the construction order according to the workshop production construction order, and report any problems to the production department in time.

2.準備生產材料

2. Prepare production materials

(1)三粘操作人員根據書刊尺寸準備書背紙、堵頭布、紗布、膠黏劑等材料。

(1) Three stick operators prepare materials such as back paper, plug cloth, gauze and adhesive according to the size of books and periodicals.

(2)制殼操作人員按車間施工單要求備料，準備壓力機和制殼用紙板，根據書殼紙板的性質確定糊殼用膠。

(2) The shell making operator prepares materials according to the requirements of the workshop construction sheet, prepares the press and the shell making cardboard, and determines the glue for pasting the shell according to the nature of the book case cardboard.

(3)套合操作人員準備襯紙、壓力機等。根據書殼封面的顏色、用料等確定上殼用膠和掃襯用膠。

(3) The nesting operator prepares the lining paper, press, etc. According to the color and material of the cover of the book case, determine the glue for the upper case and the glue for the lining.

(4)準備碼放成品的臺板，將待加工產品運到工作臺前。

(4) Prepare the pallet for stacking finished products and transport the products to be processed to the workbench.

3.準備設備

3. Prepare the equipment

開機前檢查設備，確保設備正常運轉，開機時先發信號，經過試機，確認沒問題后，方可正式生產。

Before starting the machine, check the equipment to ensure its normal operation. When starting the machine, send a signal first. After the machine is tested and confirmed to be OK, it can be officially produced.

生產中

In production

1.制書芯

1. Book block making

印刷完成的單頁經折頁、配頁、鎖線、壓平、裁切、漿背、扒圓、起脊、三粘等工序完成書芯制作。下面，筆者就精裝書的漿背、扒圓、三粘工序介紹操作過程中的注意事項。

The printed single page is folded, matched, stitched, flattened, cut, pasted back, rounded, ridged, and glued. Next, the author introduces the precautions in the process of hardcover book's back pasting, rounding and three gluing.

(1)漿背是指書芯打好捆后，用稀薄的膠黏劑在書背處涂刷，使書芯基本定型。待膠層干燥后，將書逐本分開并檢查質量，對于漿背不齊的書，要重新進行漿背。

(1) The back of the book refers to that after the book block is bundled, the back of the book is brushed with a thin adhesive to make the book block basically shaped. After the adhesive layer is dry, separate the books one by one and check the quality. For books with uneven back, re paste the back.

(2)精裝書書背分圓背和方背，方背精裝書的書芯不需要扒圓，圓背精裝書的書芯需要扒圓。書背扒圓后要保證圓式、弧長一致，圓弧對應的圓心角約為90°～130°。

(2) The back of hardcover books is divided into round back and square back. The book block of square back hardcover books does not need to be rounded, and the book block of round back hardcover books needs to be rounded. After rounding the back of the book, ensure that the circular type and arc length are consistent, and the center angle of the arc is about 90 ° ~ 130 °.

(3)三粘工序即粘堵頭布、粘書背紙、粘紗布。

(3) The three sticking process is to stick the plug cloth, stick the book back paper and stick the gauze.

①粘堵頭布

① Stick plug cloth

堵頭布的裁切寬度為書背的寬度。在書背的天頭、地腳處刷白乳膠，再把堵頭布貼上，要求粘直、粘平、粘牢，堵頭布的邊露出書芯上下切口約1mm寬。

The cutting width of the plug cloth is the width of the back of the book. First, brush white emulsion on the crown and foot of the back of the book, and then stick the plug cloth, which is required to be straight, flat and firm. The edge of the plug cloth exposes the upper and lower cuts of the book block, which are about 1mm wide.

②粘紗布

② Sticky gauze

將書背刷白乳膠，將裁切好的紗布居中粘在書背處，要求粘平、粘牢。

Brush the back of the book with white latex, and stick the cut gauze on the back of the book in the middle, which is required to be flat and firm.

③粘書背紙

③ Sticky back paper

將整個書背刷白乳膠，將裁切好的書背紙粘在書背處，粘平、粘牢，注意不要將膠液蹭到書芯切口的其他部位。

Brush the whole back of the book with white latex, stick the cut back paper on the back of the book, stick it flat and firmly, and be careful not to rub the glue against other parts of the cut of the book block.

2.制書殼

2. Book case making

(1)封面材料的剪角要適度，剪下太多會包不住紙板，剪下太少又不易于包角。對封面材料刷膠時，要求薄而均勻。

(1) The corners of cover materials should be cut appropriately. Cutting too much will not wrap the cardboard, and cutting too little will not wrap the corners easily. When applying glue to the cover material, it is required to be thin and uniform.

(2)保證封面上的書背字居中，在放入紙板時，紙板要向左右兩邊靠，中徑紙板要居中放置。

(2) Make sure that the words on the back of the book on the cover are centered. When placing the cardboard, the cardboard should lean to the left and right sides, and the medium diameter cardboard should be placed in the middle.

(3)包邊要包實，不得出現空邊。包角要平整，不得出現雙角和包角不嚴。

(3) The edge wrapping shall be solid without empty edges. The wrap angle shall be flat, and there shall be no double angle and loose wrap angle.

(4)壓平時壓力要均勻、足夠，保證書殼壓的平整且無皺褶。壓平后的書殼要逐一檢查，將中徑紙板歪斜的挑出來進行修復。將檢查過的書殼豎直晾干。晾干后的書殼面對面整齊堆積，在上面用重物加壓，以備后續燙印或上殼。

(4) When flattening, the pressure should be uniform and sufficient to ensure that the book case is pressed smoothly and without wrinkles. The flattened book case should be checked one by one, and the medium diameter cardboard should be picked out askew for repair. Dry the checked book case vertically. After drying, the book cases are stacked neatly face to face, and the top is pressurized with a heavy object for subsequent hot stamping or shell loading.

3.套合

3. Nesting

(1)對書殼的書溝處刷膠時，不要使膠液流到其他位置。確定書芯尺寸與書殼尺寸適合后，將書芯放在書溝處，試套合，檢查三面飄口是否一致以及書背與書脊

(1) When applying glue to the book groove of the book case, do not let the glue flow to other places. After determining that the size of the book block is suitable for the size of the book case, put the book block in the book groove, try to fit it, and check whether the floating mouth on three sides is consistent, and whether the back and spine of the book are consistent

是否平服，然后合上書殼將三面飄口擺正，將書溝壓實。

Whether it is flat, then close the book case, put the floating mouth on three sides straight, and finally compact the book ditch.

(2)掃襯時刷子要輕輕向上抬起，保證刷膠薄而均勻，不能有刷不到膠或溢膠現象。壓平時壓力要一致和足夠，確保襯紙粘得結實、平整。

(2) When sweeping the lining, the brush should be gently lifted up to ensure that the glue is thin and uniform, and there should be no glue failure or glue overflow. When flattening, the pressure should be consistent and sufficient to ensure that the backing paper sticks firmly and smoothly.

(3)掃襯壓平完成后，要逐一檢查書本有無粘壞襯頁、倒頭、漏掃、溢膠等故障。

(3) After the completion of lining sweeping and flattening, the books should be checked one by one to see if there are any faults such as sticking the lining, overturning, missing sweeping, glue overflow, etc.

(4)壓槽操作時，要保證書溝平直，不能出現雙溝。

(4) During groove pressing operation, ensure that the book groove is straight and straight, and double grooves are not allowed.

(5)各工序操作人員要按照車間規定做好質量標識。

(5) The operators of each process shall make quality identification according to the regulations of the workshop.

(6)機器正常運轉時，操作人員要堅守崗位，隨時觀察機器的運轉情況和產品是否合格。發現問題要立即停機處理，嚴禁在機器運轉時排除故障。

(6) When the machine is in normal operation, the operator should stick to his post and observe the operation of the machine and whether the products are qualified at any time. If any problem is found, stop the machine immediately for treatment. It is strictly forbidden to remove the fault when the machine is running.

生產結束后

After production

(1)先檢驗成品，再進行包封操作。對完工的產品進行統計，清點尾數，上報車間調度員。注意在成品打包時不能使用捆繩的方式，防止勒壞精裝書的飄口。

(1) Inspect the finished product first, and then carry out the encapsulation operation. Count the finished products, count the mantissa, and report to the workshop dispatcher. Note that the way of binding rope cannot be used when packaging the finished product to prevent the floating mouth of the hardcover book from being damaged.

(2)及時修復當班廢本，對不能修復的廢本進行打捆，放到指定

(2) Timely repair the waste books on duty, bundle the waste books that cannot be repaired and put them into the designated place

地點。

Location.

(3)如實填寫生產日報表。

(3) Fill in the daily production report truthfully.

(4)搞好班后設備的維護及現場清理工作，做好交接班手序。

(4) Do a good job of equipment maintenance and site cleaning after shift, and do a good job of shift handover procedures.

問題解決流程

Problem solving process

1.機臺問題

1. Machine problems

車間對機臺提出的問題進行分析，屬于本車間的問題或車間可以解決的問題自行解決。

The workshop analyzes the problems raised by the machine, and solves the problems belonging to the workshop or the problems that the workshop can solve by itself.

2.材料問題

2. Material problems

車間時間通知生產管理部門，生產管理部門根據材料管轄范圍責成相關部門解決。

The workshop shall notify the production management department at the first time, and the production management department shall instruct relevant departments to solve the problem according to the jurisdiction of materials.

3.質量問題

3. Quality problems

對于上工序質量問題，車間應時間通知技術質量部，技術質量部責成相關車間進行解決，并對問題性質進行分析，提出處理意見及今后防范措施。

As for the quality problems of the previous process, the workshop shall notify the technology and quality department at the first time, and the technology and quality department shall instruct the relevant workshops to solve them, analyze the nature of the problem, and put forward handling opinions and future preventive measures.

4.客戶問題

4. Customer problems

---對于關系客戶的問題，車間應時間通知客戶服務部，客戶服務部與客戶聯系盡快拿出解決辦法，保證生產正常進行。

---For problems related to customers, the workshop should notify the customer service department at the first time, and the customer service department should contact the customers to come up with solutions as soon as possible to ensure the normal production.

以上就是為大家介紹的有關濟南精裝書制作的詳細的介紹,希望對您有所幫助.如果您有什么疑問的話,歡迎聯系我們.我們將以的態度,為您提供服務http://www.aozhouhui.com/

The above is a detailed introduction to the production of hardcover books in Jinan. I hope it will help you. If you have any questions, please contact us. We will provide services for you with a professional attitude http://www.aozhouhui.com/